На леглото на принтера ▾
PiGRRL 2 - Raspberry Pi Game Console
**UPDATE 1.2 (10/12/17)** Top and bottom case has been update. Replaced standoff "nubs" with mounting holes. Mounting holes updated to 2.6mm diameter (works with M2.5 x 5mm screws). Holder updated to better house slide switch.
Разбивка по части (18) ▾
| Част | Тегло | Време | Формат |
|---|---|---|---|
| 1. pause-start | — | — | stl |
| 2. pitft-btns | — | — | stl |
| 3. shoulder-mount | — | — | stl |
| 4. shoulder-btns | — | — | stl |
| 5. action-btns | — | — | stl |
| 6. pigrrl2-bot | — | — | stl |
| 7. dpad2 | — | — | stl |
| 8. pigrrl2-top | — | — | stl |
| 9. pigrrl2-top-splitA | — | — | stl |
| 10. pigrrl2-bot-splitA | — | — | stl |
| 11. pigrrl2-top-splitB | — | — | stl |
| 12. pigrrl2-bot-splitB | — | — | stl |
| 13. pigrrl2-bot-v1-1 | — | — | stl |
| 14. pigrrl2-top-v1-1 | — | — | stl |
| 15. washer | — | — | stl |
| 16. washerB | — | — | stl |
| 17. pigrrl2-bot-v1-2 | — | — | stl |
| 18. pigrrl2-top-v1-2 | — | — | stl |
Описание
**UPDATE 1.2 (10/12/17)** Top and bottom case has been update. Replaced standoff "nubs" with mounting holes. Mounting holes updated to 2.6mm diameter (works with M2.5 x 5mm screws). Holder updated to better house slide switch. **UPDATE 1.1** The case has been updated! Added new switch holder. New lip snap fits halves together, so no need for news! Removed screws holes for amp, Pi 2 and powerboost, just snap fit onto nubs! Added washers to prevent screws from puncturing case. https://www.youtube.com/watch?v=xzfvlyLVFtw Full Parts List & Tutorial: https://learn.adafruit.com/pigrrl-2/overview Download Fusion 360 FREE http://autode.sk/1Ro3wkb PiGRRL Gamepad PCB on Oshpark https://oshpark.com/shared_projects/i2TaIEic Raspberry Pi Retro Game Console This project takes the original concept of the PiGRRL and makes it more powerful, using a Raspberry Pi 2 (or Model B+). It's about the same size but features more buttons (D-Pad, A,B,X,Y, L, R, pause and start.) and four extra buttons on the PiTFT. It's sporting a small audio amplifier and speaker, so you can enjoy the crispy sounds of 8-bit goodness. Easier to build! With this update, we really wanted to make it easier to build. We've dramatically cut the build time in half by making a custom gamepad PCB. Just solder in the buttons and an IDC box header to the gamepad PCB - No more tedious button wiring! Project Expectations This project is geared towards beginners, but is still a big project to take on. This guide will walk you through all the necessary steps to wire, assemble and build your very first Raspberry Pi game console. It does require a good amount of soldering, wire tinning and good ol' elbow grease, but don't be discouraged! If your dedicated to take on this project, it'll only take a weekend to make. License: CC-BY · Original by adafruit · Source: https://www.thingiverse.com/thing:1277483